Raspberry Pi Google Assistant With Sleek Wood Box

STORY

I’ll show how to build a DIY Google AI Assistant using a Raspberry Pi, USB Speaker and USB microphone. I’ll also show how to make the sleek hardwood box it’s housed in.

I’m assuming a basic knowledge of the linux operation system, raspberry pi and unix command line. If your new to raspberry pi there are plenty of good getting started tutorials here https://www.raspberrypi.org/help/

If your not interested in woodworking. You can easily substitute the wooden box for something simpler, like a cardboard box or a plastic project box.

Hardware used:

Raspberry Pi 3 Model B: 

Mini USB microphone: 

Mini USB speaker: 

Raspberry pi power adapter

Raspberry pi micro SD card with Raspian OS installed

330ohm resistor

3mm warm white LED

bread board prototyping wires

electrical tape

Materials needed for the box:

10mm aluminum tube

Tasmanian oak was used for the wood. Each board measured 24x9x1.2cm

Wood finishing oil, I used Danish oil.

2mm wood screws

30mm wood screws

Tools used:

soldering iron

tenon saw

hand router

bench chisel and mallet

sand paper

drill press

electronics perfboard was used as a template for the speaker holes

hacksaw

  Downloand File

Douploads |  uplod

Downloand |  Downloand