Intro to Soldering & Debouncing
STORY
Intro to Soldering
This week's assignment was to create solder 4 short pieces of wire. Adafruit's soldering tutorial has detailed instructions and was very helpful. Instead of wasting new wire, I used pieces of scrap wire I had laying around, which happened to be stranded wire.
First I used a wire strippers to strip the ends of the wires. The wire stripper has different holes for several common wire thickness, my wire was 28 gauge. Then I twisted the ends together and used a soldering iron to melt the solder onto the connected wire.
Demo & Code
Intro to Soldering & Debouncing
Reviewed by XXX
on
สิงหาคม 25, 2560
Rating:
Reviewed by XXX
on
สิงหาคม 25, 2560
Rating:
ไม่มีความคิดเห็น