GY-BME280 (Temperature Humidity Pressure Sensor)

BME280 module for temperature measurement Temperature, humidity and pressure. Use Borsch's BME280 chip to communicate over an I2C bus. A 5 volt power supply can be used on Arduino boards.


Brand: China
Model: FZ1639

BME280 module for temperature measurement Temperature, humidity and pressure. Use Borsch's BME280 chip to communicate over an I2C bus. A 5 volt power supply can be used on Arduino boards.
Suitable for measuring temperatures in the range 0 to 65 degrees Celsius (+ 1.0 degree Celsius error)
Suitable for measuring tolerances in the range of 20 to 80% RH (+ 3% RH deviation).
Suitable for pressure measurements in the range of 300 to 1100hPa (+ 1.0 hPa deviation)


The module uses a 5 volt power supply, with 3.3 volt on board. Connected to the microcontroller via the I2C interface at the SDL pin to the SDA. The Voltage Divider can be connected to a 5 volt level.

Downloand File

Douploads |  uplod

Downloand |  Downloand